The University of Iowa

The Learning Spaces Technology [LST] group provides consulting, design, installation, training, management and support for 300+ technology-equipped University Classrooms [UCRs] across campus and classrooms assigned to departments.

Classroom Updates

Beginning Fall semester of 2020, all UCRs will have webcams and microphones for use with UICapture software for lecture capture and podcasting, and Zoom software for synchronous classroom delivery:
•  Camera - Huddly Go, USB HD web conferencing camera with wide-angle lens on flexible arm mount, or wall-mounted PTZ webcam
•  Microphone - MXL AC-404 USB Conferencing boundary mic, or wireless microphone

Beginning Fall semester of 2021, all UCRs will have Solstice Pods for in-classroom wireless content sharing, and Zoom-compatible document cameras:
•  Wireless Presentation Device - Mersive Solstice Pod with unlimited connections
•  Document Camera - WolfVision vSolutions Cam document camera [or original document camera]


Need Help? Contact ITS Help Desk

Phone: 319-384-4357 [HELP]

Email: its-helpdesk@uiowa.edu

 

University Classroom Technology Guide

Getting Started with KRC 2C University Classroom Technology

 

Using A/V Control Panel

This TILE learning space is equipped with an Extron digital touchscreen A/V Control Panel Interface.

  1. To start A/V system, touch lectern's Control Panel Interface screen and remember to shutdown system [press SYSTEM OFF button] when finished

If you encounter an unresponsive A/V Control Panel Interface:

  • check Projector MUTE button is not selected on A/V Control Panel Interface
  • attempt to shutdown and restart A/V Control Panel Interface
  • contact ITS Help Desk if A/V system remains unresponsive

See Control Panel Interface documentation for additional information.

Using Room Modes

This learning space is equipped with Room Modes unique to this learning space and controlled via Extron digital touchscreen A/V Control Panel Interface. The three unique Room Modes available in this learning space are: BASIC MODE, SEND TO ALL DISPLAYS, and RESTORE ALL DISPLAYS.

  • BASIC MODE
    • this default mode provides basic functionality with no source/input on any screens/monitors
  • SEND TO ALL DISPLAYS MODE
    • this mode provides basic functionality to display the main screen source/input on every table monitor [five total] to help facilitate duplication of content display in large learning spaces
  • RESTORE ALL DISPLAYS MODE
    • this mode provides a reset to BASIC MODE and normal Media Lectern function

Note: Room Modes can be changed amid session by pressing the ROOM RESET button on the A/V Control Panel Interface

Using Single Monitor-Multiple Monitor Displays

This learning space is equipped with a single lectern computer monitor and multiple screens/monitors [five monitors] to help facilitate duplication of content display in large learning spaces.

  1. When pressing A/V Control Panel Interface's ON button, A/V system will by default use PC [lectern computer's monitor] as its source/input
  2. To view or project an alternate source, such as SOLSTICE, DOC CAM, BLU-RAY or STUDENT TABLES, select source/input accordingly on A/V Control Panel Interface

If you encounter an unresponsive projector:

  • check Projector MUTE button is not selected on A/V Control Panel Interface
  • see Digital Imaging Projector documentation for additional information, and/or contact ITS Help Desk

See Single Monitor-Multiple Screens documentation for additional information.

Using Lectern Computer

This learning space is equipped with a Windows Desktop Workstation Computer.

  1. Press Space Bar on computer keyboard to wake main computer display
  2. Log on with HawkID & password, and remember to log off when finished

If you cannot access computer’s login menu:

  • check computer monitor is powered ON
  • make certain HDMI/Display Port cable is connected on back of monitor
  • restart computer by pressing down Power Button on computer until it powers down, then press again to restart
  • contact ITS Help Desk, if issue persists

Using Wired Microphones

This learning space is equipped with a Wired [XLR] Lectern Microphone.

  • Lectern Microphone is typically mounted on media lectern surface and provides audio input for both room's speakers, as well as lectern computer and its Zoom, UICapture/Panopto, and Skype for Business apps
  • Lectern Microphone is on by default [Lectern Microphone may be muted on microphone base; a green LED light means the microphone is unmuted]
  • Lectern Microphone may be directionally adjusted to accommodate speaker

If you encounter non-working Lectern Microphone:

    • select Speakerphone (AV Bridge CONFERENCE) as audio input/source device in lectern computer's Zoom, Panopto, or Skype for Business apps
    • make certain Lectern Microphone is not muted [Lectern Microphone may be muted on microphone base; a green LED light means the microphone is unmuted]
    • if correct microphone input device is not available for lectern computer's apps, contact ITS Help Desk

See Capturing Computer Video and Audio documentation for additional information.

Using Wireless Microphones

This learning space is equipped with Wireless Microphones [one lavaliere and one handheld].

If you encounter non-working wireless microphone:

    • check microphone info display for power or muting
    • check microphone display info for potential battery replacement; rechargeable batteries are typically located on battery charger, alkaline batteries are typically located within microphone drawer
      • if using rechargeable battery supplies, remember to replace depleted batteries on charger
      • if nearing end of battery supplies, contact ITS Help Desk for resupply
    • select Speakerphone (AV Bridge CONFERENCE) as audio input/source device in lectern computer's Zoom, Panopto, or Skype for Business apps
    • if correct audio input device is not available for lectern computer's apps, contact ITS Help Desk

See Capturing Computer Video and Audio documentation for additional information.

Using Computer/Web-conferencing USB Camera

This learning space is equipped with a wall-mounted PTZ camera.

  • PTZ cameras may be re-positioned with Control Panel Interface as needed [press CAMERA source button on A/V Control Panel Interface to access options]

If you encounter non-working Computer/Web-conferencing USB Camera:

    • select AV Bridge CONFERENCE as camera input/source in lectern computer's Zoom, Panopto, or Skype for Business apps
    • if correct camera input device is not available for lectern computer's apps, contact ITS Help Desk

See Capturing Computer Video and Audio documentation for additional information.

Room Audio

This learning space is equipped with in-room audio output from lectern computer through ceiling-mounted speakers and controlled via A/V Control Panel Interface.

  • A/V Control Panel Interface contains touchscreen Volume Slider; drag Volume Slider up to increase volume, drag Volume Slider down to decrease volume
  • Press Audio MUTE button on A/V Control Panel Interface to control audio muting

If you cannot produce in-room audio from lectern computer with the A/V system on and un-muted:

    • ensure computer/device, app, or website audio is not muted
    • increase computer/device, app, or website audio level, or increase A/V Control Panel Interface audio level
    • select Extron HDMI (Intel(R) Display Audio) as speaker or audio playback source in lectern computer's Zoom, Panopto, or Skype for Business apps
    • check computer/device audio Settings: select Extron HDMI (Intel(R) Display Audio) as lectern computer's audio output device or playback source

Using Blu-Ray Media Player

This learning space is equipped with a Blu-Ray Media Player.

  1. Select BLU-RAY as display input/source on A/V Control Panel Interface
  2. Press Eject button on Blu-Ray Media Player disc tray [typically mounted in A/V rack] or A/V Control Panel Interface to load BD or DVD media
  3. Blu-Ray Media Player may be controlled with A/V Control Panel Interface, or by remote control typically available near Blu-Ray Media Player or in A/V rack drawer

If you cannot produce in-room video and/or audio from Blu-Ray Media Player with the A/V system on and un-muted, and BLU-RAY selected:

    • increase A/V Control Panel Interface audio level
    • toggle Projector MUTE button on A/V Control Panel Interface, or toggle MUTE button on Blu-Ray remote control [if available]
    • restart A/V system by pressing control panel SYSTEM OFF button, wait a minute, then press STARTUP again
    • if using DVD media, you may alternatively attempt to play it through lectern computer's DVD player
    • if issue persists, contact to ITS Help Desk

See Blu-Ray Media Player documentation for additional information.

Using Document Camera

This learning space is equipped with a WolfVision Visualizer document camera.

  1. Select DOC CAM as display input/source on A/V Control Panel Interface
  2. Document camera should auto power on; if unresponsive, check document camera has power cable connected and press power button ON

If document camera cannot be projected with A/V system on and un-muted, and DOC CAM selected on A/V Control Panel Interface:

    • press power button on doc cam [typically, doc cam's power button light should turn green when powered on]; if unresponsive, check document camera has power cable connected
    • check document camera has HDMI cable connected to OUTPUT [for use with Zoom, or UICapture/Panopto, document camera must also have a USB cable connection]
    • toggle Projector MUTE button on A/V Control Panel Interface
    • restart A/V system by pressing control panel SYSTEM OFF button, wait a minute, then press STARTUP again
    • contact ITS Help Desk, if document camera remains unresponsive

See Document Camera documentation for additional information see Document Camera & Zoom Guide for information on Document Camera & Zoom Capture.

Using Solstice

This learning space is equipped with Solstice wireless collaboration and content sharing platform.

  1. Select SOLSTICE as source on A/V Control Panel Interface

If Solstice cannot be projected with the A/V system on and un-muted, and SOLSTICE selected on A/V Control Panel Interface:

    • Solstice may require a power-cycling; report to ITS Help Desk

See Solstice documentation for additional information.

Using Accessible Media Lectern

This learning space is equipped with an Accessible Media Lectern with adjustable height capability.

  1. Press lectern's height-adjusting buttons [typically located on right side and just under lectern's surface] to raise/lower lectern

See Accessible Media Lectern documentation for additional information.

Using Accessible XLR Audio Input/Output

This learning space is equipped with Accessible XLR Audio Input/Output capability.

See Accessible XLR Audio Input/Output documentation for additional information.

 


Visit the COVID-19: Classroom Experience site for additional information regarding University Classroom expectations for the 2021 Fall semester.

For information regarding the COVID-19 Operational Response for Custodial Services, Building Operations and Maintenance and/or the UI Operational Plan for Cleaning and Disinfecting of Building Spaces, please visit the Facilities Management.

For assistance with classroom technology issues, please contact the ITS Help Desk at 384-HELP [4357] or its-helpdesk@uiowa.edu

University Classroom Support